Clemco CMS-1 Carbon Monoxide Monitor
CMS-1 is a wall-mountable carbon monoxide monitor and alarm for respirator air supply. If CO exceeds 10 ppm, it triggers a warning light, and a high-decibel audible alarm.
NOTE: CMS monitors do not remove CO or convert CO to CO2.
Advantages
- One monitor can serve multiple respirators
- Microprocessor circuit and digital readout provide accurate readings
- Simple, rugged construction for indoor or field use
- Manual calibration accomplished in minutes
- Long-lasting replaceable sensor
- May be used with 120 volt AC or 12 volt DC power source
- Accommodates optional remote alarm kit
Specifications
- Shielded to reject radio frequency interference
- Includes 10 Feet of 1/8" tubing and connector fittings
- Electrochemical sensor responds instantly to CO
- CMS-1 has polycarbonate case with impact-resistant clear plastic cover meets NEMA-4 specifications
- Nominal noise rating of 98 dB at distance of one foot for the standard alarm; and 100dB at a distance of 3.1 feet for the optional remote alarm.
Apporvals and Certifications
- Meets OSHA requirement for CO monitoring
Requirements for Operation
- Compressed-air source (55 to 145psi) of Grade D breathing air as defined by the Compressed Gas Association commodity specification: G-7.1 (www.cganet.net)
- Air flow of .5 to .8 scfh at 55psi or more to operate and maintain adequate sampling
- Power - 120 volt AC or 12 volt DC. Line cord provided for 120 volt AC; may be conduit wired.