Natrium Sodium Bicarbonate
Natrium Soda Blast Media
Natrium Products Inc. offers three soda blast media grades, differentiated only by the average particle size or granulation. Natrium Product Inc's soda blast media formulations are pure sodium bicarbonate and manufactured with no additional flow agents. The result is better productivity, reduced dust levels, and better solubility in water.
The table below summarizes the key differences of each formula and a general guideline for applications. We recommend trying the Natrium 260 for most applications, but encourage you to contact our experienced sales team to find the best choice for your specific job.
|
Forumla |
Natrium 150 |
Natrium 260 |
Natrium 300 |
| Mesh | 100 | 50 | 45 |
|
Average Micron |
160 | 300 | 350 |
| Flow Aid | 0% | 0% | 0% |
| Application | Fire & mold restoration, wood surfaces, and applications where delicate coating removal & surface preparation with minimal substrate damage are required. | Automotive & diesel engines, aerospace parts, turbines, pumps, turbo chargers, tanks, valves, and remanufacturing. Heavy coatings. Applications where efficiencies would be realized by degreasing and removing coatings in a single step. | Remanufacturing, or removal of the most difficult coatings where other soda media may have failed. Where the highest productivity and/or the least amount of dust are required. |
Benefits of Soda Blasting
- Sodium bicarbonate is an environmentally friendly, water soluble material that can remove contaminants and coatings efficiently normally without damaging delicate substrates.
- Because it is relatively soft, 2.5 on Mohs hardness scale, it is the ideal media for many substrates.
- As in any blast application it is recommended a test strip be blasted to make sure soda blast is the appropriate blast media for the application.
- Can be used for remanufacturing and refurbishing
Sizes
- 45 (Natrium 300) Remanufacturing, or removal of the most difficult coatings where other soda media may have failed. Where the highest productivity and/or the least amount of dust are required.
- 50 (Natrium 260) Automotive & diesel engines, aerospace parts, turbines, pumps, turbo chargers, tanks, valves, and remanufacturing. Heavy coatings. Applications where efficiencies would be realized by degreasing and removing coatings in a single step.
- 100 (Natrium 150) Fire & mold restoration, wood surfaces, and applications where delicate coating removal & surface preparation with minimal substrate damage are required.
Packaging
- 50lb bags
- 2300lb sacks