Soft King
Cleans, Degreases, and Strips Using Soda and Other Lightweight Media
The Soft King uses bicarbonate of soda and other lightweight media to quickly and gently clean delicate surfaces in an environmentally-sensitive way. When using bicarbonate of soda, the process will not scratch or etch steel, glass, ceramics, concrete, and most hard plastics. Bicarbonate of soda is non-toxic and watersoluble, making it safe to use for many applications, including food processing plant maintenance. In fact, using baking soda – without additives – does not require kosher supervision. And, the soda residue can be conveniently rinsed into existing drains. The added benefit of wet blasting eliminates the dust normally associated with dry blasting.
Applications
|
Industries
|
Specifications
Model 1 (Stock No. 22505) for dry-mode operation only features a cart-mounted pressure vessel with 60-degree conical bottom for enhanced lightweight media flow, 1.5 cubic feet media capacity, 5-psi to 150-psi working pressure, internal media agitator, automatic pop-up valve, 1 1/4-inch ID piping, and manually-adjustable diaphragm-style media metering valve, pneumatic remote controls with RLX control handle and 50 ft remote control hose.
Model 2 (Stock No. 21460) for dry-mode or wet-mode operation is equipped as above, but also includes the following: Integral wetblast injector system with 3/8-inch high-pressure water hose, shut-off valve/nozzle adaptor, 50 ft of 1 1/4-inch ID Supa blast hose coupled, TMP-5 tungsten carbide nozzle with Contractor thread, machine screen and cover.
Features |
Speicifications |
Ordering Infomation |
Soft King |
|
Standard Equipment when ordering |
Standard Accessory Air Filter/Moisture separator* |
*Bicarbonate of soda attracts and retains humidity, causing media flow problems. The air filter/moisure separator removes moisture from the air supply. |
Standard Equipment when ordering |
Wetblast Injector System (built-in) |
Self-priming pump 4:1 ratio (max 400 psi water pressure) | Standard only when ordering Stock No 21460 |
Supa Blast Hose Stock No 23481 |
1-1/4" ID x 50 ft, coupled | Standard only when ordering Stock No 21460 |
TMP-5 Blast Nozzle Stock No 23521 |
5/16" orifice, tungsten carbide lined, rubber jacketed | Standard only when ordering Stock No 21460 |
Machine Screen Stock No 03099 |
16" Diameter | Standard only when ordering Stock No 21460 |
Machine Cover Stock No 02335 |
16" Diameter | Standard only when ordering Stock No 21460 |
Optional Accessory In-Line coalescent filter Stock No 23748 |
Flow rate: 200 cfm Maximum Pressure: 150 psi Size: fits 3/4" to 1-1/4" piping |
Must be ordered separately. Recommended for high humidity areas |
Operator Safety Respirator protection is part of an OSHA-required safety program |
For Dry Blasting NIOSH-approved Clemco Apollo supplied-air respirator (must be ordered separately) |
For Wet Blasting NIOSH-approved Clemco Apollo supplied-air respirator (must be ordered separately) |
Utilities | ||
Air Consumption with 5/16" orifice nozzle | 137 cfm @ 100 psi 200 cfm @ 150 psi |
165 cfm @ 100 psi 228 CFM @ 150 psi |
Water Consuption with 6-orifice nozzle | None | 2.6 gallons per minute maximum |