Canfield & Joseph

Please enter a search term to begin your search.

Blast Rooms

Home » Surface Prep » Blast Equipment » Blast Rooms » Empire Pre-Engineered Blast Booths

Empire Pre-Engineered Blast Booths


Empire's Pre-Engineered Blast Booths (PEB) feature the essentials of blast rooms at a fraction of the cost. These ten-foot-High booths not only include the hardware required to strip large parts fast. They also reclaim media, remove dust and breathe fresh air into the work enclosure with Empire's exclusive Booth Ventilation System (BVS).

Available in five sizes, these booths ship flat and can be assembled by three people using a forklift or scissor lift in two days. Because the PEB bolts together and requires no excavation, it can be disassembled and set up at a new site in less than a week.

For many applications requiring strict environmental and safety compliance, Empire's Pre-Engineered Booths offer an attractive alternative to makeshift enclosures or Higher priced blast rooms.

All PEB parts-ranging from the central blast and recovery system to pre-wired electrical connections and 14 gauge wall panels-come from Empire, where they have been engineered and built to work in harmony. This assures balanced performance between components and provides users with a single source of responsibility for overall system performance.


Standard Blast Enclosures
  • 10' Wide x 10' Long x 10' High
  • 10' Wide x 14' Long x 10' High
  • 12' Wide x 17' Long x 10' High
  • 12' Wide x 24' Long x 10' High
  • 12' Wide x 31' Long x 10' High
  • 14-gauge, bolt-fastened, steel panels
Pressure Vessel
  • SuperBlast® 350 or 650, ASME construction
  • 780 remote controls with automatic Sure-Flo® grit valve
  • 1-1/4" piping
  • Capacity: 3.5 or 6.5 cubic feet
  • Moisture separator/filter and choke feature
  • Safety interlock solenoid
Blast Equipment
  • Silicone-carbide, venturi nozzle
  • 1"-ID x 25' or 50'-long, heavy-duty blast hose with couplings
  • Saf-Stop II™ pneumatic blast-control handle
  • 30' or 55' dual-line pneumatic control hose
Media Reclaimer
  • Rugged, 11-gauge, welded-steel construction
  • Tunable to various media sizes
  • 800 CFM ventilation
Pressure Blower for Media Recovery
  • 10 hp, 3450 RPM, 800 CFM (at 42" static pressure H2O)
  • 440-480 V, 60 Hz, fused disconnect
Dust Collector for Media Recovery
  • 11-gauge, welded-steel, reinforced construction
  • 189 ft2 filtration through 30 cotton-sateen bags
  • Large access door; raised clean-out door
  • Push-button, pneumatic cleaning
Media Conveying Duct
  • 4" ID x 25' long-Heavy-duty construction
Media Recovery Hopper
  • 14-gauge, welded-steel construction
  • Anti-clogging refuse screen
  • 30" wide x 30" deep x 12" high
Media Storage Hopper
  • 11-gauge, welded-steel construction
  • Viewing window
  • Capacity: 3.5 or 6.5 cubic feet
BVS™ for Booth Ventilation
  • 11-gauge, welded-steel, reinforced construction
  • 1,500 ft2 filtration with 6 cartridges
  • Push-button, pneumatic cleaning
  • 10 hp blower; 230, 460, or 575 V; 60 Hz; fused disconnect

Questions or Comments?

Contact Us

For immediate assistance or to place an order, call your closest location.