Bullard Free-Air® Electric-Driven Pumps
When placed in a clean air environment, Bullard Free-Air® pumps offer a low-cost means of supplying clean, breathable air to respirator wearers working in contaminated environments up to 300 feet away from the pump. They are easy to operate and maintain. Free-Air pumps do not require temperature alarms, CO monitors or airline filters, so they can be a cost-effective alternative to compressed air.
- Completely mobile and portable
- No expensive installation costs
- Models available to suit any application
- Models that support up to ten respirators
- Available in versions to support climate control devices
EDP10
-
Air Flow: 10 cfm at 5 psig. Supplies air to:
Two workiers wearing a continuous-flow, supplied air half or full face mask respirators
One worker weaering a continuous-flow, supplied air hood or helmet style respirator - Requirements: Supplied-air respirators used with this pump must be NIOSH approved to operate at 15 psig or less
- Inlet Filter: Medium efficiency, keeps particles larger than 25 microns out of the air supply. Inlet filter can be extended up to 300 feet from the pump using V50IN and V50EX remote extension hose kits.
- Outlet Filter: Carbofine with activated carbon
- Weight: 49 lbs.
- Dimensions: 8” wide x 16.3” long x 13.5” high
- Open drip-proof motor drive, for use in clean, dry areas
EDP16
-
Air Flow: 16 cfm at 5 psig. Supplies air to:
Three workers wearing continuous-flow, supplied-air half or full face mask respirators
Two workiers wearing a continuous-flow, supplied-air hood or helmet style respirator. - Requirements: Supplied-air respirators used with this pump must be NIOSHapproved to operate at 15 psig or less
- Inlet Filter: Medium efficiency, keeps particles larger than 25 microns out of the air supply. Inlet filter can be extended up to 300 feet from the pump using V50IN and V50EX remote extension hose kits.
- Outlet Filter: Carbofine with activated carbon
- Weight: 98 lbs.
- Dimensions: 14” wide x 28” long x 16” high
- Operates with a totally enclosed fan cooled motor. For use in oily, moist or dusty conditions.
EDP30
-
Air Flow: 30 cfm at 10 psig. Supplies air to:
Six workers wearing continuous-flow, supplied-air half or full face mask respirators
Four workiers wearing a continuous-flow, supplied-air hood or helmet style respirator
Cool air to two workers using Bullard's Frigitron 2000 air conditioner with certain NIOSH-apporved Bullard hood style respirators - Requirements: Supplied-air respirators used with this pump must be NIOSHapproved to operate at 15 psig or less
- Inlet Filter: Medium efficiency, keeps particles larger than 25 microns out of the air supply.
- Outlet Filter: Carbofine with activated carbon
- Weight: 292 lbs.
- Dimensions: 26” wide x 38” long x 32” high
- Air supply hose quick-disconnect pod can be extended 300 ft from pump using V60 extension hose kits
- Open drop-proof motor drive, for use in clean, dry areas
EDP50
-
Air Flow: 50 cfm at 10 psig. Supplies air to:
Ten workers wearing continuous-flow, supplied-air half or full face mask respirators
Seven workiers wearing a continuous-flow, supplied-air hood or helmet style respirator - Requirements: Supplied-air respirators used with this pump must be NIOSHapproved to operate at 15 psig or less
- Inlet Filter: Medium efficiency, keeps particles larger than 25 microns out of the air supply.
- Outlet Filter: Carbofine with activated carbon
- Weight: 317 lbs.
- Dimensions: 26” wide x 38” long x 32” high
- Air supply hose quick-disconnect pod can be extended 300 ft from pump using V60 extension hose kits
- Open drop-proof motor drive, for use in clean, dry areas
ICE Pump
The Bullard ICE Pump provides workers with increased protection and comfort while maximizing productivity. ICE safely provides clean, breathable air to workers wearing Type C or CE Continuous Flow Supplied Air Respirator hoods or masks.